AFE Firmware Versions

[T0] Switch WiFI

Basic version with relay auto-switch off function

Download

  • Hardware:
    • 1 x Relay,
    • 2 x LEDs,
    • up to 2 x  mono/bi-stable switches
  • Functionalities:
    • a relay can be controlled by MQTT or/and HTTP protocol
    • a relay can be turned on/off by a button/switch – max 2 buttons/switches could be configured
    • a relay can be manually controlled by external switch even if the device is not connected to a WiFi router
    • there is a possibility to set a default value for a relay after power is restored
    • there is a possibility to set a default value for a relay after connection to MQTT Broker has been established
    • two direction Domoticz integration
    • an automatic relay switch off after a defined time
    • LED can inform about relay state
    • any GPIO can be assigned to relays, LEDs, and switches
    • Device IP address can be fixed or automatically assigned by router DHCP
    • configuration through the internet browser
    • upgrade to a newer version of firmware can be made through the internet browser
    • the configuration panel is in English or Polish
  • Other: firmware is preconfigured for Sonoff Basic, Sonoff Touch, Sonoff S20

[T1] WiFi Switch with a temperature sensor (DS18B20)

Version with relay automatic switch off, thermostat and thermal protection function

Download

  • Hardware:
    • 1 x Relay,
    • 2 x LEDs,
    • 1 x Temperature sensor DS18B20
    • up to 2 x  mono/bi-stable switches
  • APIs: MQTT, HTTP
  • Functionalities:
    • Same functionalities as in T0 version and additionally
    • possibility to connect DS18B20 temperature sensor
    • temperature can be corrected manually
    • possibility to choose Celcius or Fahrenheit for temperature
    • temperature reads interval can be defined
    • thermostat function
    • possibility to turn on/off thermostat over the MQTT or HTTP protocols
    • thermal protection function
    • DS18B20 can be connected to any digital GPIO
  • Other: firmware is preconfigured for Sonoff Basic, Sonoff Touch, Sonoff S20

[T2] WiFi Switch with a temperature and a humidity sensor (DHxx)

Version with relay automatic switch off, humidistat. thermostat and thermal protection function

Pobierz

  • Hardware:
    • 1 x Relay,
    • 1 x LED,
    • 1 x Temperature and humidity sensor: DHT11, DHT21, DHT22
    • up to 2 x  mono/bi-stable switches
  • APIs: MQTT, HTTP
  • Functionalities:
    • Same functionalities as in T0 version and additionally
    • possibility to connect temperature and humidity sensor DHxx
    • possibility to correct value of temperature and/or humidity
    • possibility to choose Celcius or Fahrenheit for temperature
    • temperature and humidity read interval can be defined
    • thermostat and humidistat functions
    • possibility to turn on/off thermostat and humidistat over the MQTT or HTTP protocols
    • thermal protection function
    • DS18B20 can be connected to any digital GPIO
  • Other: firmware is preconfigured for Sonoff Basic, Sonoff Touch, Sonoff S20

[T3] 4 WiFI PIRs and relays

A version supporting up to 4 move detection sensors which can control up to 4 relays

Download

  • Hardware:
    • up to 4 x Relays,
    • up to 5 x LEDs,
    • up to 4 x Move detection sensors (PIR)
    • up to 5 x mono/bi-stable switches
  • APIs: MQTT, HTTP
  • Functionalities:
    • relays can be controlled by MQTT or/and HTTP protocol
    • relays can be turned on/off by buttons/switches – max 5 buttons/switches could be configured
    • relays can be controlled by PIRs
    • there is a possibility to assign a PIR to a relay
    • relays controlled by PIRs can be turned on for a certain time defined by a user
    • a LED can be assigned to a PIR sensor; LED afterward will inform about move’s detections for a particular PIR
    • a device can send MQTT messages whenever a move is detected
    • state of PIR sensor can be checked by sending HTTP Request
    • there is a possibility to set a default value for a relay after power is restored
    • there is a possibility to set a default value for a relay after connection to MQTT Broker has been established
    • any GPIO can be assigned to relays, LEDs, PIRs, and switches
    • Device IP address can be fixed or automatically assigned by router DHCP
    • configuration through the internet browser
    • upgrade to a newer version of firmware can be made through the internet browser
    • the configuration panel is in English or Polish
  • Other:
    • Firmware is not pre-configured
    • There is no possibility to connect all listed hardware items to one ESP8266 due to a limited number of GPIOs but I’m giving you options to choose those you need for your specific hardware

[T4] 4 WiFi Switches

This version controls up to 4 relays independently

Download

  • Hardware:
    • up to 4 x Relays
    • up to 5 x LEDs
    • up to 5 x mono/bi-stable switches / buttons
  • APIs: MQTT, HTTP
  • Functionalities 
    • relays can be controlled by MQTT or/and HTTP protocol
    • relays can be turned on/off by buttons/switches – max 5 buttons/switches could be configured
    • it’s possible to control relays without a WiFi connection
    • relays can be automatically switched off after certain time defined by a user
    • there is a possibility to set a default value for a relay after power is restored
    • there is a possibility to set a default value for a relay after connection to MQTT Broker has been established
    • LED can inform about relay state
    • any GPIO can be assigned to relays, LEDs, and switches
    • Device IP address can be fixed or automatically assigned by router DHCP
    • configuration through the internet browser
    • upgrade to a newer version of firmware can be made through the internet browser
    • the configuration panel is in English or Polish
  • Other:
    • Firmware is for Sonoff 4CH

 TO BE TRANSLATED …

[T5] Gate controller WiFi addon

It controls gate controller and allows connecting magnetic sensors and DHxx temperature and humidity sensor

Download

  • Hardware:
    • 1 x relay
    • up to 3 x LEDs
    • up to 2 x mono-stable switches, buttons
    • up to 2 x magnetic sensors or end-switches
    • 1 x temperature and humidity sensor DHxx (DH11,DH21,DH22)
  • APIs: MQTT, HTTP
  • Functionalities:
    • sending a signal to a gate controller over MQTT/HTTP protocol
    • sending a signal to a gate controller by pressing a button connected to ESP
    • the signal duration can be set from 1 millisecond to 2 seconds
    • a device sends automatically state of the gate, relay values from DHxx sensor
    • there is a possibility to get on demand a state of magnetic sensors and values from DHxx sensor over HTTP and MQTT
    • any GPIO can be assigned to relays, LEDs, switches, magnetic sensors and DHxx sensor
    • LEDs can indicate a state of a device and/or magnetic sensors
    • Device IP address can be fixed or automatically assigned by router DHCP
    • configuration through the internet browser
    • upgrade to a newer version of firmware can be made through the internet browser
    • the configuration panel is in English or Polish
  • Others:

Next version in development … 🙂

If something is unclear post a comment here or use EN Forum support.

Udostępnij

Dodaj komentarz

Proszę Zaloguj się aby komentować
  Subskrybuj  
Powiadom o